casino plus free 100

List of the catalog of this article:

• 1, How to deal with motorcycle thermal attenuation
• 2、What to do with the thermal attenuation of Haojue engine oil
• 3, My Suzuki Ruishuang 125 motorcycle, after running the hot engine, the power drops, what's going on?
• 4, Will the thermal attenuation of motorcycles damage the engine?

How to deal with motorcycle thermal attenuation

There are many ways to avoid thermal attenuation, such as using better oil and replacing smoother exhaust pipes. Oil can take away heat, and better oil can quickly take away heat. A smoother exhaust pipe can also quickly discharge high-temperature exhaust gas, which can avoid overheating of the engine.

For example, you can use better engine oil and replace a smoother exhaust pipe. Oil can take away heat, and better oil can quickly take away heat. A smoother exhaust pipe can also quickly discharge high-temperature exhaust gas, which can prevent the engine from overheating.Small-dispachement motorcycles are prone to thermal decay during long-distance riding.

When this happens, you should gradually slow down and stop the engine to cool down, and pay attention to the speed and load during driving to avoid the occurrence of heat decay. In addition, the quality of the oil will also have an impact on thermal decay to a certain extent. For long-distance or high-speed running, you should choose high-quality oil with a higher level and greater viscosity.

Slight thermal attenuation has little effect on the engine. When this situation is found, it is best to stop and rest for a while, or slow down and reduce the load. If you continue to drive under heavy load, it will have a negative impact on the engine and increase the possibility of wear and damage.

No matter how high the temperature is, the motorcycle will not be able to move. If it doesn't move at all, check whether the clutch is worn out.If it is serious, replace the clutch chip. If the extreme speed slows down, whether it is the thermal attenuation of the engine caused by long-term high-speed driving, or whether the antifreeze leaks, check the water tank in time and replenish the antifreeze.

What to do with the thermal attenuation of Haojue engine oil

The thermal attenuation is caused by excessive engine temperatureIn the case of reduced power, there are many ways to avoid thermal attenuation, such as using better oil and replacing a more unobstructed exhaust pipe. Oil can take away heat, and better oil can quickly take away heat.

Thermal attenuation is a situation where the engine power is reduced due to excessive temperature. There are many ways to avoid thermal attenuation, such as using better oil and replacing smoother exhaust pipes. Oil can take away heat, and better oil can quickly take away heat. A smoother exhaust pipe can also quickly discharge high-temperature exhaust gas, which can avoid overheating of the engine.

When this happens, you should gradually slow down and stop the engine to cool down, and pay attention to the speed and load during driving to avoid the occurrence of heat decay. In addition, the quality of the oil will also have an impact on thermal decay to a certain extent. For long-distance or high-speed running, you should choose high-quality oil with a higher level and greater viscosity.

My Suzuki Ruishuang 125 motorcycle, after running the hot engine, the power drops, what's going on?

First of all, we need to understand the cause of lack of motivation. It may be due to wear or blockage of the engine, pollution of the air filter, aging of spark plugs, etc. These problems will cause the engine to run poorly, thus affecting the power performance of the vehicle. Next, we can take some measures to solve this problem.

The oil supply system, air filter blockage, mixed gas is too thick or too thin, etc. will cause the current vehicle power decline, and the simple and effective way to troubleshoot is to look at the exhaust color of the exhaust pipe first, and then look at the spark plug.

Check whether the air intake system is blocked or leaking.If the intake system is blocked or leaked, it will inevitably affect the inflation efficiency of the engine, resulting in a decrease in engine power and acceleration performance. Specifically, the air filter, air intake pipe and various vacuum hoses should be checked for blockage or leakage. Check whether the exhaust system is blocked.

The first possible reason is that the clutch slips. The cold car is not obvious, and the skidding is serious when the hot car is hot. Its performance is the fastest, and the ratio of engine speed and odometer speed has changed, that is, part of the speed is lost due to slippage. Second, the oil lubrication is not good, which leads to a decrease in sealing when the car is heated.

Poor tire pressure in cars: Poor tire pressure is also one of the reasons for the decline in engine power, especially when the tire pressure is insufficient and the number of people is large. Solution: Therefore, when the tire is inflated, it must be filled with enough, and it should be filled according to the tire pressure gauge marked on the car body.

Will the thermal attenuation of motorcycles damage the engine?

1. Small-dispapment motorcycles are prone to thermal attenuation during long-distance riding. Thermal attenuation is affected by the reduction of cylinder pressure, which will affect the reduction of engine power. The pressure of the steel cylinder is reduced because it expands and shrinks coldly. Most small-displacement air-cooled engines are prone to thermal attenuation, while most large-displacement water-cooled engines are not.

2. Small-dispaction motorcycles are prone to heat recession when riding long distances. Thermal attenuation is caused by a decrease in cylinder pressure, which will lead to a decrease in engine power. The pressure drop of the cylinder is caused by hot expansion and cold contraction. Most small-displacement air-cooled engines are prone to thermal recession, while large-displacement water-cooled engines generally do not have thermal recession.

3. When riding for a long distance, small-dispance motorcycles are prone to heat recession. Heat attenuation is caused by a decrease in cylinder pressure, which will lead to a decrease in engine power. The pressure drop of the cylinder is caused by thermal expansion and cold shrinkage. Most small-displacement air-cooled engines are prone to thermal recession, while large-displacement water-cooled engines generally do not.

4. It will also aggravate the wear of the engine. In this case, you should gradually slow down and stop to cool down the engine, and pay attention to the speed and load during driving to avoid the occurrence of heat decay. In addition, the quality of the oil will also have an impact on thermal decay to a certain extent. For long-distance or high-speed running, you should choose high-quality oil with a higher level and greater viscosity.