Bingo Plus

This articleList of contents:

• 1, How to install the system on a new solid-state drive
• 2, How to use a solid-state drive to install a computer system
• 3、 How to install the system on the solid-state drive?

How to install the system when buying a new solid-state drive

Preparation: - Hardware: Buy a solid-state drive suitable for your model. - Software: Prepare an operating system that can be installed Installation media, such as Windows 10 installation CD or USB drive. Backup data: It is recommended that you back up important data before any operation.

First of all, format the newly purchased solid-state drive in the computer system. It is best not to format it quickly, but to format it slowly.After formatting, install the system with the one-click restore tool. If there is no accident in the middle, you can be sure that there is no problem with the system installation.

Choose to enter PE and then reformat and partition your old hard disk. ( If the SSD capacity is large enough, it is recommended to divide it into two disks, one only installs the system and the other installs common applications. In this way, it will be smoother and more comfortable to use, and the system disk is at least 60GB or more).

Answer #Collection# Is the earlier you buy a ticket, the cheaper it is? Xiao Li said Sannong soviel 1 hour ago · Contributed more than 228 answers Follow The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk to install the system.

Prepare to install the media: First, you need to prepare aThe installation media containing the operating system can be a Windows installation disc or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

How to optimize the performance of solid-state drives: Some ways to optimize the performance of solid-state drives are introduced, such as turning off system recovery, turning on TRIM, etc., to improve the user experience and life of solid-state drives.

How to use a solid-state drive to install a computer system

Prepare the installation media: First, you need to prepare a system that contains an operating system The unified installation media can be a Windows installation CD or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

Find a USB flash drive. ( The capacity should not be less than 6GB). Find a startup USB disk making tool, then download and install it successfully and insert it into your USB disk to start making. After successful production, download a system GHOST mirror package you need to install on the Internet and put it into the boot USB flash drive that has been made.

Prepare a blank USB flash drive of more than 8G, search and download the installation bar USB disk making tool on Baidu and open it. Select the USB flash drive in the production system, and the parameters will start production directly by default. At this time, we choose a system mirror image and choose Windows 10 Professional to download.

First of all, format the newly purchased solid-state drive in the computer system. It is best not to format it quickly, but to format it slowly. 2. After formatting, install the system with the one-click restore tool. If there is no accident in the middle, you can be sure that there is no problem with the system installation.

How to install the system on the solid-state drive?

First of all, in the computer systemFormat the newly bought solid-state drive. It's best not to format it quickly, but to format it slowly. 2. After formatting, install the system with the one-click restore tool. If there is no accident in the middle, you can be sure that there is no problem with the system installation.

Preparation: - Make sure you have a bootable system installation media, such as a Windows installation disc or USB installation disk. - Make sure your computer is turned off and connect the solid-state drive correctly to the SATA interface on the motherboard.

- Insert the operating system installation media into the computer and restart the computer. - Follow the instructions on the installation interface to install the operating system. During the installation process, select the solid-state drive as the installation target.Complete the installation: - After the installation is completed, restart the computer and start from the solid-state drive. - Check whether the system is working normally.

The installation method is the interface of the 5-inch SATA solid-state drive is the same as the interface of the mechanical disk. Put the solid-state disk on the hard disk rack (if it is not easy to install, buy a solid-state drive bracket), connect the data cable and power cable, and the solid-state drive can be used. Set up the master-sceept disk.

The method of entering the BIOS varies from computer manufacturer to computer manufacturer, usually by pressing the FF12 or Delete key at startup. In the BIOS settings, find the startup option and set the solid-state drive as the preferred startup device. Save the settings and exit the BIOS. Paragraph 3: System installation Insert the system installation media and restart the computer.