Europa League app

List of Contents of this article:

• 1, How to flash Skyworth Cool
• 2、 How to flash Skyworth Cool TV?
• 3、 Can Kukai flash Skyworth system
• 4,Europa League app How to enter the flash mode of Kukai 6.0.8
• 5, How to upgrade the Kukai system

Skyworth Cool How to flash the machine

1. The first step: download the strong flash package. Pay attention to choose a strong flash package consistent with your own TV movement; Step 2: Put the upgrade package under the root directory of the USB flash drive, not in the folder, otherwise the upgrade package cannot be detected; Step 3: Insert the USB flash drive into the USB interface behind the TV.

2. Prepare tools: USB flash drive, computer, third-party firmware; operation steps: download the third-party streamlined firmware package. Download address: Create a new folder "upgrade" on the root directory of the USB flash drive, which will update.Copy the zip file to this folder and insert it into the USB interface of the box after completion.

3. Open Skyworth TV, select Zu Settings - TV Settings in the boot interface, and click to enter the Zu TV Settings interface. The operation can only be completed by using the left and right up and down of the remote control and the confirmation button. 2 Select the system settings. In the interface of Skyworth TV's Zu Settings-TV Settings, there are three options, namely: image settings, sound settings, and system settings.

4. You can enter REC mode. There are two types of errors: 1. The upgrade package cannot be found. 2. The software update failed. The above is the situation of not opening the box. Open the box, short-circuit mode, short-circuit the box of 15, 16 pins of the camera or metal wire, four files are installed in the root directory of the USB flash drive, and the power-on is automatically forced. Halfway through, as shown in the figure, the robot turned over.

5. During the flashing process, there is no response after the set-top box is connected to the computer. There are three main reasons: first, it does not enter the flash mode; second, the corresponding driver is not installed; third, there is a problem with the flash cable.

6. What you want to ask is how to flash Skyworth TV without a physical button? The method is as follows. Turn on the TV, click the God-given button on the remote control, and enter the page to select the settings. Select About This Machine/This Machine Information On The Settings Page, And You Can View The Native Information Of Your TV On This Interface.

How to flash Skyworth Cool TV?

1. The first step: Download the strong brush package. Note that you must choose a strong flash package that is consistent with your own TV movement; the second step: put the upgrade package under the root directory of the USB flash drive, not in the folder, otherwise the upgrade package cannot be detected;Step 3: Insert the USB flash drive into the USB port behind the TV.

2. During the flashing process, there is no response after the set-top box is connected to the computer. There are three main reasons: first, it does not enter the flash mode; second, the corresponding driver is not installed; third, there is a problem with the flash cable.

3. You can enter REC mode. There are two types of errors: 1. The upgrade package cannot be found. 2. The software update failed. The above is the situation of not opening the box. Open the box, short-circuit mode, short-circuit the box of 15, 16 pins of the camera or metal wire, four files are installed in the root directory of the USB flash drive, and the power-on is automatically forced. Halfway through, as shown in the figure, the robot turned over.

4. What you want to ask is how to flash Skyworth TV without physical buttons? The method is as follows. Turn on the TV, click the God-given button on the remote control, and enter the page to select the settings.Select About This Machine/This Machine Information On The Settings Page, And You Can View The Native Information Of Your TV On This Interface.

5. This method can be installed through the computer without opening the box assistant tool on the computer. Select or TV model to connect. After the connection is successful, select Install the application and enter. At this time, you can upload the software saved on the computer and wait a few seconds to install it on the TV.

Can Kukai flash the Skyworth system

1. Step 1: Go to the Kukai forum to download the strong flash package, pay attention to the must choose the strong brush package consistent with your own TV movement; Step 2: Put the upgrade package under the root directory of the USB flash drive, can't Put it in the folder, otherwise the upgrade package cannot be detected; Step 3: Insert the USB flash drive into the USB interface behind the TV.

2. No, it doesn't have a flash program at present, and it can't find a new ROM on the Internet.

3. The operation steps are as follows: press the "Home" button of the remote control to return to the home page. Press the "Cloud Application" button of the remote control to enter the cloud application interface. Click the "God-given System Upgrade" application to enter the main interface of the application. Click "Brush back to cooface system", and then click "OK".

4. The general way to upgrade Skyworth Cool TV: start the TV. Use the TV remote control to operate, and press the [Cool Open] button to enter the main interface of [Cool Open TV]. After entering the main interface of [Kukai TV], find [Settings] and click to enter.

5. If you don't want to upgrade now, you can skip it. Next time, you can find the upgrade information in [Settings]--[Upgrade].

How to enter the flash mode of Cool Open 6.0.8

The premise is to prepare a USB flash drive, The capacity of the USB disk is greater than 1GB, the format requires FAT32 format, and it has not been made into other forms of tool induction disk. The genuine USB disk is of better quality; find your own TV model and firmware version.

You can enter REC mode. There are two kinds of errors: 1. The upgrade package cannot be found. 2. The software update failed. The above is the situation of not opening the box. Open the box, short-circuit mode, short-circuit the box of 15, 16 pins of the camera or metal wire, four files are installed in the root directory of the USB flash drive, and the power-on is automatically forced. Halfway through, as shown in the figure, the robot turned over.

When the mobile phone is turned off, press and hold the power button and the volume up button for 3 seconds at the same time to enter the flash mode. After entering the flash mode, press the volume up/down key to select the corresponding function, and press the power key to confirm the selected function.

Turn on the power of the mobile phone, and then enter the desktop of the mobile phone. At this time, press the power button for a long time, and the screen will restart or shut down. Choose to restart the mobile phone, and press the two function keys of volume down and power on at the same time when restarting.THEN YOU WILL ENTER THE FASTBOOT MODE OF THE MOBILE PHONE, WHICH IS THE FORCED FLASH MODE.

Android system: Press and hold the power button and the volume up or down key at the same time, or press the three keys together, and hold them for 10 seconds to force the flash interface. Apple system: manually enter DFU mode: power-on state, connect to the computer with a data cable.

How to upgrade the Kukai system

1. According to the query of ZNDS smart TV network, the upgrade steps of Kukai k55 are as follows: access the network so that the TV can access the network. Turn on the TV and turn it on normally on the main interface.

2. First, open Kukai uiv0 and enter the main interface. Secondly, click Settings to find the system.Finally, in the system, click Update, and you can upgrade after the update is completed.

3. Open Skyworth Cool TV, enter the home page, and select "Settings" - "System Upgrade" - "Online Upgrade". If the system of the TV has been updated, it will prompt you to find a new version (as shown in the figure below). If not, "No software update for the time being" will be displayed.

4. Kukai TV has two upgrade methods: online upgrade and local upgrade. The online upgrade steps are as follows: Step 1: After the TV is turned on, if there is a new version, the TV will automatically pop up a prompt box, click [Upgrade Now]; (If you don't want to upgrade now, you can skip it. Next time you can find the upgrade information in [Settings]--[Upgrade].